Study of nucleon-nucleon and alphanucleon elastic scattering by the Manning-Rosen potential

Although often used in molecular dynamics, in this work the Manning–Rosen potential is parameterized to compute the scattering phase shifts for the nucleon–nucleon and the alpha-nucleon systems by exploiting the standard phase function method. We obtain excellent agreement in phase shifts with the more sophisticated calculations up to partial waves ${\ell }=2.$     

White and some colored marbles as alternative radiation shielding materials for applications

ABSTRACT

In this paper, the radiation shielding parameters such as linear attenuation coefficients (LAC, µ), mass attenuation coefficients (MAC, µ/ρ), effective atomic numbers (Z_eff), effective electron densities (N_eff), half value of layers (HVL), mean free paths (MFP) and buildup factors (exposure (EBF) and energy absorption (EABF)) were investigated for cream (M1), pink (M2), white (M3), maroon (M4) and green (M5) marbles. Attenuation coefficients were measured in the energy region 31.18–661.66 keV photon energies. The values of Z_eff and N_eff were then calculated using these coefficients with logarithmic interpolation method, and HVLs and MFPs were calculated using the values of LAC of marble samples at the same photon energies. The experimental results were compared with the theoretical values obtained from WinXCom program, and good agreements were observed between the experimental and theoretical results. HVLs and MFPs of all marble samples were compared with those of some concretes, glasses and commercial radiation shielding glasses (SCHOTT Co.). The studied marbles were better radiation shielding materials than standard shielding concretes due to lower HVL and MFP values lower than the ordinary concrete. Finally, EBFs and EABFs of the marbles were calculated in the energy region 0.015–1?MeV up to penetration depths of 40 mfps by Geometric Progression method (G-P), and the results were discussed in terms of photon energies and chemical compositions of the marbles.     

Computational study of the formation of aluminum-graphene nanocrystallites

The molecular dynamics method is used to study the formation of the Al/graphene nanocomposite in the structural grains of different size under the action of internal stresses. The behavior of graphene sheets inside an individual structural grain as well as in the process of two Al grains containing graphene are joined is investigated. The motion of graphene films, starting from the middle of the aluminum matrix, ends with their location at the crystallite boundaries. Graphene moves in the Al matrix along closely packed planes. In this case, graphene sheets acquire curvature. An intergrowth of graphene sheets is also observed. A contact between two Al-C nanocrystallites through a graphene interlayer is created. The self-diffusion coefficients of atoms and the partial potential energies increased with decreasing nanocrystallite size. The angular distribution of the nearest geometric neighbors and the distribution of distances to the nearest neighbors are determined using the construction of Voronoi polyhedra.     

Metastable states in high carbon C–(Fe,Ni, Co) films obtained by three-electrode ion-plasma sputtering

Abstract

The effect of ion-plasma deposition on the structure of high-carbon films (at. %) Fe–(20–84) % С, Co–(5–52) % С, Ni–(7–61) % С was investigated. The lattice periods and crystallite sizes of nonequilibrium phases in the as-deposited state and after heating are determined. The temperatures of the beginning and end of the decay of metastable phases during heating at a constant speed are established. The transition from an amorphous to an equilibrium crystalline state in Fe–C films passes through the stage of formation and subsequent decomposition of an intermediate, metastable hcp phase of variable composition. The electrical and hysteretic magnetic properties of the films were measured in the as-deposited state and after heat treatment. The compositions and conditions for producing films with low values of the temperature coefficient of electrical resistance and high coercive force are established. Thus, high-carbon films of Ni–61% C in the as-depoteted state and Fe–69% C films after heating to 900?K are characterized by small TCR values (± 10^?6 К^?1) over a wide temperature range.     

基于VIKOR和关联系数的犹豫三角模糊语言多属性决策方法

针对属性评价值为犹豫三角模糊语言集的多属性决策问题,提出一种基于VIKOR方法的犹豫三角模糊语言多属性决策方法.首先定义了犹豫三角模糊语言集的相关概念.然后运用VIKOR和关联系数方法,在可接受优势和决策过程稳定的条件下对方案进行择优,在理论分析的基础上,提出了这种新方法的计算步骤.并构建了确定最优属性权重的非线性规划模型,研究了当专家权重和属性权重未知情况下的犹豫三角模糊语言多属性决策方法.最后通过实例说明了该方法的有效性和可行性.     

塞曼效应仿真实验平台

塞曼效应实验是学生了解原子具有磁矩和空间取向量子化现象的重要实验,至今塞曼效应仍是研究能级结构的重要方法之一.为了能够让学生更加清楚地了解塞曼效应实验的基本原理和操作规程,针对教学中的重点和难点,运用flash软件制作出塞曼效应仿真实验.该程序可全程高度仿真实验过程,具有界面友好、易于操作、无需安装等优点.为实验教学提供了一种新的辅助方式.     

基于激光雷达的垂直能见度反演算法及其误差评估

针对大气垂直方向上消光系数分布不均匀难以用传统方法直接测量垂直能见度的问题,提出了一种基于激光雷达探测垂直能见度的计算方法。根据大气辐射传输基本原理,借助于辐射传输方程,推导出了垂直能见度的计算公式;然后利用激光雷达原理方程和Klett算法反演出大气垂直方向上的消光系数分布,基于此提出了垂直能见度的迭代算法。最后,利用灰色模型GM(1,1)和批统计算法,对激光雷达反演得到的后向散射系数进行了评估,给出了误差置信区间为(0.760±0.339)×10^-4(srad·km)^-1。结果表明,该方法是一种特别有效的计算垂直能见度的方法,符合探测的基本需求,且误差小精度高。     

Finite deformation swelling of a temperature-sensitive hydrogel cylinder under combined extension-torsion

The swelling behavior of a temperature-sensitive poly-N-isopropylacrylamide(PNIPAM) hydrogel circular cylinder is studied subjected to combined extension-torsion and varied temperature. In this regard, a semi-analytical solution is proposed for general combined loading. A finite element(FE) analysis is conducted, subjecting a hydrogel cylinder to the combined extension-torsion and the varied temperature to evaluate the validity and accuracy of the solution. A user-defined UHYPER subroutine is developed and verified under free and constrained swelling conditions. The FE results illustrate excellent agreement with the semi-analytical solution. Due to the complexity of the problem, some compositions and applied loading factors are analyzed. It is revealed that for larger cross-linked density and larger ending temperature, the cylinder yields higher stresses and smaller radial swelling deformation. Besides, the radial and hoop stresses increase by applying larger twist and axial stretch. The hoop stresses intersect at approximately R/Rout = 0.58, where the hoop stress vanishes. Besides, the axial force has direct and inverse relationships with the axial stretch and the twist, respectively. However, the resultant torsional moment behavior is complex, and the position of the maximum point varies significantly by altering the axial stretch and the twist.